Reset hp psc 2410 photosmart all-in-one

1) Remove scanner cover by pulling forward hinge clip and lifting cover vertically.

2) Remove control panel by sliding forward... I worked this out but trying to lever cover vertically and breaking off all of the clips :-(( ...... Printer still works and control panel stays in place although it is loose

Note: There are two clips at back and two at front

3) Remove 5 Screws using Hex Driver - Size 10. There are two screws on left , two on right under the control panel and one in middle at the back under the cover hinge.

4) Lift the top up, slid scanner head to middle.

5) Put it all back together and turn it on.