1. Run a continuous test through the control panel.
2. After 10-15 pages have printed press online button to cancel.
3. Unplug the printer once the pages have all come out from the test printing.
4. Remove the fuser by removing the 2 screws that hold it into the printer.
5. Use 2-3 q-tips to gently clean the now softened buildup.
6. As you know, the fuser is hot, but you can advance the rollers by rotating the plastic gear on the top of the fuser.
2. After 10-15 pages have printed press online button to cancel.
3. Unplug the printer once the pages have all come out from the test printing.
4. Remove the fuser by removing the 2 screws that hold it into the printer.
5. Use 2-3 q-tips to gently clean the now softened buildup.
6. As you know, the fuser is hot, but you can advance the rollers by rotating the plastic gear on the top of the fuser.
{ 0 comments... Views All / Send Comment! }
Post a Comment